UniStock MK1. Universal VR Gunstock (Oculus Touch)
Description
This is a gunstock for Oculus Touch controllers. ETSY https://www.etsy.com/pl/UFLimited/listing/1118371901/unistock-mk1-all-oculus-touch?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1636663655744 Upgrades: Aluminium rail, and aluminium X,Y Axis system parts. Improved rigidity, weight reduced and centered on your dominant hand. A rubber paint coating inside the controllers cups, to improve connection between controller and a cup. Permanent locks are working on magnets, instead friction, and are reinforced with steel parts. Butt setup with only one screw, additional quick switch system. A carefully selected retraction rubber band, whole pump shotgun system improved. Detachable butt, a mini gunstock option. Systems: Adjustable handles- User can set his handles positions in any place on the main rail. Screw located below is responsible for locking the handles in place. X,Y Axis adjustable butt- User can set the butt position on 2D surface, instead of 1D single direction. This will alow You to set Your butt position,suited for assault riffles, sniper riffles, heavy machine gun, SMG`s and all types of shotguns.(all two handed weapons). This system will always get your butt perpendicular to the rail. Magnetic & Permanent locks- Uni is equipped with standard, magnetic system, present in every gun stock, and a permanent locking system. the activation\deactivation button is located below the controllers cups. when the system is on, the aluminium 15mm\3mm\39mm part, will move through 2/3 of the cups. This will block your handles machanically. (there is 0.5 mm tolerance from all sides of the aluminium part, to the insides of the cups.This results with some looses, unnoticable when playing). Buttons are equiped with magnets, in strategic positions, to maximize the reliability, and minimize the forces needed for switching the button. Improved strenght thanks to Two M3 steel rods going through the system. Pump Shotgun retraction- the aiming handle is upgraded with 8 rolls. 2 from every side. rolls are placed on smooth axises, and all the mechanism is treated with WD40 for maximum friction reduction. Also, there is an additional extention of plastic above the rail, on the aiming handle. This allows for mounting the retraction band. the top mounted retraction system, will make a pump shotgun experience even smoother, thanks to proper forces distribution. User can set the distance for both, a hook, for the rubber band, and the whole system itself. The retraction system is also your, front handle, baundry. To turn on the pump shotgun, unscrew the bottom screw on the front handle entirely (up to the blockade). The amount of tension, and the distance of pump action can be adjusted. Normaly I will provide You with the loosest setup. This allows for using shotgun without permanent locking the front handle. IF You wish to increase the tension, by shortening the band, and/or the hook-front handle distance, remember to permanent lock Your front handle. Magnets won`t be enough. Quick swich- this system allows you to switch between any two guns (ex. Assault riffle/Sniper riffle, Iron sight shotgun/heavy machine gun with holo sight (pavlov)) within few seconds. Pcv pipe is equiped with two blockers, on both ends. They are freely adjustable, and can be locked by screwing the screw through a steel nut inside the blocker. the amount of friction produced when screw is tightly press against the PCV will securily lock Your set position. Thanks to the 4 triangles on the blockers, and two triangular shapes cutted out of the butt mechanism, user can set the blockers from all 4 sides of the pcv, and allow for perfect positions for the blockers. Now, the only thing, the user needs to remember, is the amount of clicks between selected two guns.
Statistics
Likes
6
Downloads
0