Kickstand / Sidestand Plate (for bigger bikes)
Description
A modified sidestand plate from https://www.thingiverse.com/thing:2888654 which was a little too small for the larger foot on my 2014 CBR1000RR's sidestand. This has been scaled 25% in the 'X', and 10% in the 'Y'. I printed one in PETG and one in PLA with 20% infill. I would recommend PETG or ABS if it is going to be used outside for any length of time, and maybe 40-50% infill especially if you have a bike that's 200+Kg (450+ lbs). I also removed the previous person's name from the plate, as they didn't design it, and if you want to name yours you could just use a marker pen if you want :)
Statistics
Likes
1
Downloads
0