Anycubic i3 Mega-S Hotbed Sintered Bronze Bearing Mounts/ Sinterbronze Gleitlagerhalterung
Description
Hotbed holder for sintered bronze bearings 8x12x20mm Press the bearing into the mount and secure them with the fixture. I used a clamp and a 12mm socket wrench socket to press the bearing into the single mount. For the dual mount, i used a 8mm socket the press the first bearing way into the mount, insert the second bearing and used the 12mm socket to press it in. Be carefull not to scratch any part of the bearing! Hotbed-Halterung für Sinterbronze Gleitlager 8x12x20mm Gleitlager in die Halterung pressen und mit dem Splint fixieren. Zum einpressen habe ich eine Schraubzwinge und einen 12mm Nuss eines Steckschlüssels genommen. Für den Dualhalter habe ich das Lager mit einer 8mm Nuss weiter in den Halter gepresst, das zweite Lager eingebracht und dieses mit der 12mm Nuss plan eingepresst. Vorsichtig einpressen und Lager an keiner Stelle zerkratzen! Parts needed / benötigte Teile: 12x M4 nuts
Statistics
Likes
1
Downloads
0