Drivable 1:72 Scale RC Step Van
Description
A functional 1:72 scale remote control step van, ends up about 25x58mm or 1x2.3" and works with most common radios. This can be printed with FDM, but requires a 0.2mm nozzle. Tested on a CR-10 with MicroSwiss DD and eSUN PLA+, most parts work best with rafts. The bucket looks pretty bad on the bottom with a raft, but normal supports may break some of the undercarriage structure. This is a tricky print and equally difficult build, but if your printer is dialed in, the steering should print-in-place and articulate without breaking. ymmv, so the individual parts are provided as well - good luck. [](https://www.youtube.com/watch?v=NPrdLxXi2Ew)
Statistics
Likes
5
Downloads
0