Nerdy Gurdy addon adjustable bridge
Description
This is an alternative string height adjustment bridge assembly for the Nerdy Hurdy V5 bridge (might work on V6 too but I haven't checked). Works as plug and play without any destructive modifications on the original bridge. You will need: - 2 x (M3x10) DIN912 simple Allen head screws - 2 x (M2.5x16) DIN912 simple Allen head screws Installation instructions: 1) Remove the original adjustment triangles, 2) Insert the saddle stop in the bridge slot, 3) Fasten the base with the M3 screws 4) Insert the M2.5 screws in the saddles. Thread the screws only for 1-2 mm, as perpendicularly as you can to the saddle's face. 5) Insert the saddles in the bridge. 6) Thread the rest of the M2.5 thread into the saddles now that they are inside the base. When the saddle starts rising stop. 7) Use the M2.5 screws to achieve proper tension of the strings on the wheel. I have included the .stp files, feel free to remix.
Statistics
Likes
0
Downloads
0