Nerf Caliburn U Streamlined Talon Claw Remix
Description
This is a remix of Captain Slug's Caliburn U. I wanted a simplified, lightweight version with a longer stock and a Talon Claw style short dart magwell, alongside some general part improvements. I felt that the original had many more rail segments than I needed and so most were removed, keeping just the rails above the magwell for mounting a sight. This blaster also uses a shorter Talon Claw ramrod, NOT a Caliburn length ramrod. It only accepts Talon magazines and only shoots short darts. With this configuration the pump has clearance for a barrel with a connector(to accommodate the ramrod when using a tighter diameter barrel), as shown in the photos. I added some built-in sling points for easy carry in the field. Where necessary I slightly changed the files for a more uniform look and tightened up some tolerances with the u-channel and improved general part fit. I used an aluminum plunger in my build, but a standard Caliburn printed plunger could be used. This remix still uses a standard Caliburn U hardware kit, but for the best possible fit on the magazine release and trigger you must use a 2.5mm pin and 2mm pin (both of which I have salvaged from other various old blasters).
Statistics
Likes
6
Downloads
0