AirArms 3 mag case
Description
simple hinged box/case that holds 3 x airarms magazines with magnets for latching. printed @0.2mm layer height in ABS with paint inlay. sshould work with most plastics but i'm not sure how well the hinge will turn out in other layer heights (I've not tested it). No supports needed. magnets are 4mm(diameter) x 3mm(height). Numerous things could be used for the hinge pin, I used 1.2mm thrust wire and a dab of super glue on the ends it could do with being a tad thicker but it works well. you could also carefully ream the hinge points and use 1.75 filament which was the original plan when I designed it.
Statistics
Likes
0
Downloads
0