Customizable & Stackable Wire Box
Description
This was originally inspired by a wirebox design by **[rpowis](https://www.thingiverse.com/rpowis/designs)**, the **[Small Spool Wire Box](https://www.thingiverse.com/thing:4942286)** Unfortunately the wire spools I had on hand did not fit in this design and I only had 6 to store at the moment. So I wanted to design my own that would both fit the wire I had but be customizable so others can fit their wires into it as well. There is tons of customization that can be done with this, just play with the options! I have included the STL for the one I printed which is the default config loaded into the settings Infill and Supports don't affect print time as it was designed to be just thick enough to not need infill and just walls. This can be adjusted in the settings for the file **All units are in mm** Spool Height: 30 Spool Diameter: 50 Viewing Windows: Yes Wire Hole: 2 Number of Spool: 6 Wall Thickness: 1.6 In this file you can edit the size of the spools both in height and diameter, the number of spools, the location of the wire hole, the size of the wire hole, viewing window, lid generation, stacking. Just anything I thought could be helpful to other makers. It should be accessible via the customizer, but if you have issues (like I do, haven't been able to render anything from there in over a year) simply download and open with OpenSCAD. You don't need to edit the code, on the right hand side there should be a panel for Parameters. Just expand that and you can edit them there.
Statistics
Likes
8
Downloads
0