Oral B Wall Mount
Description
The "Oral B Wall Mount" is a toothbrush holder for the electric toothbrushs of Oral B. The oval Oral B charger can be placed inside the toothbrush holder. Then any Oral B toothbrush compatible with this charger can be put on top. The mount provides space for 2 replaceable brush heads. The Oral B Wall mount consists of two parts. The Wall Mount can be screwed to the wall. The Toothbrush Holder can then be slid onto the screwed Wall Mount. Toothbrush, charger and brush heads can be put onto the Toothbrush Holder. This design has two advantages: - The screws necessary for mounting the holder on the wall are not visible. - The Toothbrush Holder can be dismounted easily if it has to be cleaned, e.g. if chalk from water, tooth paste stains, etc. remains. I printed the Oral B Wall Mount with PLA on a Prusa i3 printer. Tolerances for printing are considered in the Wall Mount part by reducing the edge lengths a bit. The printing result may depend on your printer, printer configuration and printing material. In my case the printed parts fitted perfectly, but in a previous test with an older printer I had to hone/ file/ polish the parts. Remark for cleaning: Please do not use hot water temperatures to clean the printed parts if you use PLA. PLA becomes soft at about 60°C. For example do not clean the parts in the dishwasher. Other materials may have other temperature dependent behavior.
Statistics
Likes
0
Downloads
0