Prusa Mk3 Raspi Cam on X-Axis
Description
Ich habe einen Prusa i3 MK 3s und dort den Raspberry Pi Zero 2 W als Octoprint-Server auf dem Einsy-Board verbaut. Weil ich noch eine Raspberry.Kamera liegen hatte, habe ich mir einen Halter gebaut, um diese an der X-Achse zu befestigen. Mir war es wichtig, den Blickwinkel der Kamera auf Höhe der Düse zu haben, deshalb habe ich sie an der X-Achse montiert. Ein Stück Flachbandkabel wird benötigt, Eine Schraube M4x25 eine Schraube M4x16 und eine Mutter M4. Als Basis für das Kameragehäuse habe ich das Design von jgeyer verwendet ( https://www.thingiverse.com/thing:2736439 ) und so modifiziert, dass der Deckel über Clips gehalten wird. Das Gewinde für die M4x12 Schraube ist in das Gelenk gedruckt. ----------------------------------------------------------------------------------------------------------------- English: I have a Prusa i3 MK 3s and on the Einsy-board the Raspberry Pi Zero 2 W installed as an octoprint server. Because I still had a Raspberry camera lying around, I built a holder to attach it to the X-axis. It was important for me to have the camera's angle of view at the level of the nozzle, so I mounted it on the X-axis. A piece of ribbon cable is required, an M4x25 screw, an M4x16 screw and an M4 nut. I used the design from jgeyer as base for the camera housing (https://www.thingiverse.com/thing:2736439) and modified so that the lid is held by clips. The thread for the M4x12 screw is printed in the joint.
Statistics
Likes
0
Downloads
0