CR-10 Max CR Touch Holder
Description
My BL Touch was having issues, so I decided to replace it with the CR Touch. Sadly none of the supplied adapters seem to fit (or I was too dumb to figure out how they fit). Since the CR touch wants to be mounted under the holder and the BL touch is mounted above it, the stock holder wont work. I decided to make my own. You'll need 4 M3x8 screws and 4 M3 nuts to secure the holder onto the carriage and the CR touch onto the holder. In order to remove the old holder and install the new one, you'll have to take the carriage off. I was able to get it off by loosening up the nut that holds the bottom wheel on. Once loosened I was able to get the carriage off.
Statistics
Likes
0
Downloads
0