Christmas Tree Ornament Gift Card
Description
<b>Update November 21, 2021 I modified the spurs slightly from the original shown in the Video. The newer version will be easier to cut off. I also added a Card Version, as these are very popular. The cards are optimized for 0.4 mm line width for faster printing.</b> I liked the thing from 3DPrintBunny (https://www.thingiverse.com/thing:4655136), but I wanted a gift that could fit in an envelope or give dinner guests to take home. So I designed my own Christmas Tree Ornament. The two files (<b>Tree Combined.stl</b> and <b>Snowflake Star Combined.stl</b>) are meant to be printed in different colours. They are combined for easier printing and to keep the parts together until assembly. The models are designed to be snap-together. No glue should be necessary. Here is a quick assembly Video (https://youtu.be/NXfvSvM5S5I). This depends on how well calibrated your printer is (compared to my printers). If the models are too tight, try to modify the “Horizontal Expansion” setting in Cura by -0.05 (as needed). I am also including all the models separately. And files for 2022 and 2023. <b>Note: Someone mentioned that they could not download the zip file. I have seen this on other Thingiverse files. If you get a 404 error message when downloading all the files, try to download the files individually from the "files" tab. </b>
Statistics
Likes
523
Downloads
0