Raspberry Pi HQ Camera + Arducam IMX477 UVC Camera Adapter Board
Description
Update: The Camera Housing USB is deeper to make room for the USB adaptor board. The Camera Housing PI is just deep enough for 6mm standoffs and the HQ Camera Sensor board. The fits on both models! Raspberry Pi HQ Camera housing designed specifically for use with the Arducam IMX477 UVC Camera Adapter Board. This housing uses standard 2.5mm offsets to mount the HQ Cam with Adaptor board and accommodates 2mm threaded inserts for the cover. With the camera installed and the cover secured, the USB port on the back of the camera is accessible, there is a viewport for the status LED, and the desired lens can be installed through the housing cover without removal. The housing also makes the standard camera mount (included with HQ Cam) accessible. USB Camera Adaptor: https://www.arducam.com/product/arducam-uvc-camera-adapter-board-for-12mp-imx477-raspberry-pi-hq-camera/ Raspberry Pi HQ Camera: https://www.amazon.com/Raspberry-Pi-Camera-Sensitivity-Alternative/dp/B08LHJR3K4/ref=sr_1_2_sspa?keywords=raspberry+pi+hq+camera&qid=1637260080&sr=8-2-spons&psc=1&smid=A3B0XDFTVR980O&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyODdYWFBBNFZCMkg2JmVuY3J5cHRlZElkPUEwMDQ5NjIwMlpITVoyQzJVMzQxUiZlbmNyeXB0ZWRBZElkPUEwOTg3ODEwMjc4WFc1NUNXNldJQiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Statistics
Likes
1
Downloads
0