Beavis Box Arduino UNO Insert
Description
This Arduino UNO insert fits into the [Beavis Box](https://www.thingiverse.com/thing:5079274) to make breadboarding things like [Electrosmash's Pedal Shield UNO](https://www.electrosmash.com/pedalshield-uno) a little less cumbersome. What you'll need: 1(ea) [Beavis Box](https://www.thingiverse.com/thing:5079274) 1(ea) Arduino Insert 1(ea) Arduino UNO 3(ea) M3 by 8mm socket head cap screws 2(ea) [82mm by 54mm 400 point breadboards](https://www.amazon.com/gp/product/B07DL13RZH/ref=ox_sc_act_image_1?smid=AX8SR0V05IQ2E&psc=1) Assembly is pretty straightforward. Using the dovetails, assemble the breadboards together as shown in the pictures. Cut off the two dovetails that will contact the lower lip of the Beavix Box, but leave the six dove tails on the Arduino insert side (again, like the picture shows). Install the Arduino UNO into the insert using the cap screws. Install the insert and breadboards into the Beavis Box. Make noise.
Statistics
Likes
0
Downloads
0