5L Plastic tank cap - indoor watering tubing
Description
Cap for 5l plastic containers with 2 holes which allow small indoor watering tubing to pass through (after print, user a screw driver to "force" your way into the holes so that they expand a little or the tube might just not fit) This model was created on openScad and used an other project from : https://cults3d.com/fr/utilisateurs/taga23 Original model can me found here : https://cults3d.com/fr/mod%C3%A8le-3d/maison/bouchon-verseur-orientable-bidon-5l as stated on his description, you can print the model on cura setting X and Y to 102% scale for a better screw fit. Z should remain 100%. This is a base for anything you would want to make on this type of caps, the OpenScad project loads the stl model which has no "roof" and with openscad, I created a lid and pierced holes. feel free to modify to get exactly what you need :) I forgot to add a third hole to allow air to flow in the container while pump is running, i used a heated small screw driver and made one after print. It is very easy to add this yourself if you want to ;) Screwing the thing is kind of a pain then the tubes are already in place because they get twisted and tangled, I will try to add a rotating lid so that you can screw the cap without rotating the tubes.
Statistics
Likes
2
Downloads
0