Manicure Toolbox Tray Kit and Storage Box (no screws)
Description
I created a toolbox for storing some manicure tools. I am not a professional designer> everything was created by measuring all the parts and using Illustrator and TinkerCAD to create the STL files for 3D printing. #Toolkit storage capacity# * 2 regular scissors (2 scissors x 2 trays) * 1 tweezer * 2 nail clippers (medium or large) * 1 storage slot (maybe for ear sticks) * 1 toenail plier * 1 nail filer (foldable) All the STL files and images are with the final product, including the manicure tools I needed to place inside. You can print just the trays or you can also print the outer shell; but I added a printable set of caps and a rod for holding everything together in case you travel and want to take the box with you. For keeping the trays together either print 2 pieces of box-06-nut and one box-06-rod or print just one nut piece and one box-05-bolt-47mm. I used the former, but tiher one works the same. Then glue the top axis to the inside of the nut (cap) for a few seconds with some super glue. Sliced with Ultimaker Cura 4.12. Printed on an Ender 3 v2. **NOTE** The toolbox uses 2 trays for scissors and one of each of the others, so make sure you don't forget that :) #PRINT SIZES# (L x W x H) **box-01-lid:** 120 x 90 x 4 mm **box-02-scissors-v2:** 120 x 90 x 7.5 mm **box-03-nailclippers_v2:** 120 x 90 x 15 mm **box-04-bottom-pliers:** 120 x 90 x 14 mm **box-05-bolt-47mm:** 47 x 7.8 mm **box-06-nut:** 7.8 x 7.8 x 2.0 mm **box-06-rod:** 46 x 4.0 mm **box-07-box-shell:** 124.5 x 94.5 x 52.5 mm
Statistics
Likes
5
Downloads
0