Chameleon Plate for Anne Pro 2
Description
Print with Black/White Filament. Any material is fine, but I used black to reduce inter-key color bleed. You can print with white filament on a black keyboard to increase the inter-key light bleed. Set the Z axis at 0.5mm to 1.0mm height. To reduce rattle, you may stack two 0.5mm inserts. Print with a brim for maximum adhesion. WARNING: Care must be taken while cutting the excess material off as you may accidentally cut into the print itself. I am not liable for any damages whatsoever. Print at your own risk. Design modified from coco3431's "Keyboard Plate"
Statistics
Likes
0
Downloads
0