vrGUN PRO - DIY VR gun stock
Description
**vrGUN PRO** is DIY VR gun stock for Oculus Quest 2 inspired by [ProTubeVR](https://www.protubevr.com) and [Kobra VR Gunstock](https://www.youtube.com/user/Falandorn). My goal was to make fully 3D printed gun stock so no external parts are needed (except carbon tubes, bolts and nuts). Original ProTubeVR design is based on tube joints made by [norelem](https://www.norelem.com) or [kipp](https://www.kippusa.com), but parts used in this project are not compatible with them. I'm sharing also OpenScad source files here so remixes or improvements are welcome. **NOTE: This is still work in progress!** **BoM:** 6x vrGUN_PRO_tube_clamp_joint.stl 2x vrGUN_PRO_tube_clamp_t_shape.stl 1x vrGUN_PRO_controler_left_grip.stl 1x vrGUN_PRO_controler_left_grip_mount.stl 1x vrGUN_PRO_controller_right_grip.stl 8x vrGUN_PRO_lever.stl 8x vrGUN_PRO_hex_nut_spacer.stl 2x vrGUN_PRO_sling_clip.stl 1x vrGUN_PRO_stock.stl or vrGUN_PRO_stock_small.stl 1x vrGUN_PRO_pipe_cover.stl 13x M6 nut (DIN985) 5x M6 x 18mm screw (DIN7984) 8x M6 x 28-30 screw (DIN961) 2x M3 x 12 mm (DIN 912) 2x M3 nut (DIN 934) 1x carbon tube 18mm x 130mm 1x carbon tube 18mm x 200mm 1x carbon tube 18mm x 250mm 1x double-side tape 1x EVA sheet 1x 1 point or 2 points gun sling ----- **ToDo list:** - add magnets to right controller grip - make a demo video ----- Best practice is to **dry your filament before printing** to prevent cracks and breaks of 3D printed parts: 
Statistics
Likes
9
Downloads
0