Associated Element IFS High Clearance Mod
Description
These parts will increase your Element IFS ground clearance by about 6 mm in the center and 9mm at the inner and outer end of the lower suspension arms. I have parts for standard chassis height as well as Knight Custom's lowered chassis mod and the front skids have standard and TRD options. Where the axle shafts are much closer to the lower arms you will have to shave some material off of the shock mount to clear it. Update 12/5/21, uploaded a slightly beefier diff cover, V7. May not work with stock skid. I have uploaded a middle skid to work in place of the stock one. Update 12/6/21, beefed up the c-hub mainly around the bottom ball mount tab for extra strength. Update 12/7/21, added material to the diff cover so the front skid screws have more to grab onto. Lowered the diameter of the same hole so the screws can bite better. If you're using the stock chassis height you need the IFSClearanceHub x2, IFSHiClearDiffCover, IFSSkidPlate, and MiddleSkidStandardDiffMount If you are using the lowered chassis mod then you need the IFSClearanceHub x2, IFSHiClearDiffCover, IFSSkidPlateLoweredChassis, and MiddleSkid4LoweredChassis. I printed these with PLA using a .4mm nozzle and .1mm layer height. I print the hubs on their sides to maximize the strength in the ball joint mount tabs and am pleased with the results. Happy trailing!
Statistics
Likes
2
Downloads
0