newtonian telescope 130mm F3.5
Description
IS A WORK IN PRoGRESS!! I was made a Newtonian telescope, based in other thelescope, I use a 180mm out diameter and 168mm inner diameter, I use PLa but i will print in PLA+CF need to redesign the secondary support mirrors bought to Andres Arboleda, colombia primary 130mm diameter, 450mm focal secodary 63mm need: Focuser for 2 inchs or 1.25 6 springs from a 3D printer hotbed 6 M3x20mm 6 m3x40mm many nuts
Statistics
Likes
12
Downloads
0