Dragon Fly BMO rigid mount (ender3/pro/v2 and CR10)
Description
# Dragon Fly BMO rigid mount [](https://www.buymeacoffee.com/squirrelf) **Please consider supporting me if you find it useful, it would be greatly apreciated** (use the buy me a coffee or the "Tip Designer" button) with optional m6x4 threaded screw for a pneumatic mount similar mount is used on the final version of the Mars orbiter (files included with it, don't use these as they are different) https://cults3d.com/en/3d-model/tool/mars-orbiter-final-version-ender3-pro-v2-cr10-microswiss-dd-hotend-stock-dragon-dragonfly but the stl from this post will work on my other duct (alpha/beta version of the mars orbiter & solar orbiter) https://www.thingiverse.com/thing:4807645 https://www.thingiverse.com/thing:4978511 or you can build your own duct using this # screws - two M3x6 to mount it to the back plate - four M2.5x6 to go into the dragonfly (I don't think m2.5x8 will fit, but if you can then use that) - two M3 between 8mm and 12mm long (screw hole is tapered so it will get harder as the screw gets deeper, but will hold onto the plastic really well)
Statistics
Likes
1
Downloads
0