5/16" Fuel Line Disconnect Tool
Description
I used this print to remove fuel lines with the inside spring clips from my 2001 Pontiac Montana with 5/16" outside diameter fuel lines and it worked well. Note: the gcode file has a z-offset of 0.09mm, 240C nozzle temp and 90C build plate temp for printing with 1.75mm ABS. For best results, use the .step or .stl file in your slicer (print two of each as two are needed) - orient so the largest part is on the base to eliminate need for supports.
Statistics
Likes
0
Downloads
0