Compact Hemera adapter for Ender 3 (pro) (No x-axis loss, with BLTouch attachment point)
Description
How to use: 1) Put the washers and screws for the hemera into the 4 holes 2) Put the square washers into the two hemera attachment points 3) IMPORTANT Put the 3 Hex-Nuts for the rollers into their respective hex holes in the mount. This CAN NOT be done after attaching the Hemera 4) Make sure that the hotend wires go throught the wire channel 5) Attach the hemera with 10mm M3 bolts 6) Put the ender metal sled on the attachment 7) Loosely stick the rollers with their bolts into their respective holes in the plate 8) Fasten the bottom roller 9) Put the sled back on the x-axis and fast the other two rollers PS: BLTouch xy offset is ~ x:60,y:0
Statistics
Likes
2
Downloads
0