Hercules Stands HA205 Extension Yoke
Description
This is to add another mount to a Hercules guitar Stand. Hardware needed: QTY 1 M4 Nut QTY 1 12-14 mm long M4 socket head screw (To attach the two pieces together) QTY 1 22-25 mm long M4 socket head screw (This is to tighten the clamp) Print the clip on one of the sides that is completely flat. This prints the clip in an orientation that gives the flexure strength. Place the holder piece that does not have a cut-out on the bed to be the first layer.
Statistics
Likes
1
Downloads
0