TX22 +9 base, working now!!!
Description
Update part 2. cap and base v7 have room for 6mm screw heads, (6.2mm) so will either need base v7, cap v7, and body v6 for 6mm screw heads or base and body v6, and cap v5 for 5mm screw heads should be a working model now, please let me know results if you print. stoopid body (if my math is correct, and if itll actually feed, would need custom spring.) should double the factory capacity. print as laid, will need the extended spring, remove the plug from the follower, will also need 3x m3x15, cap head screws for the base and 1 m3x5 for the cap.
Statistics
Likes
2
Downloads
0