Revo 2.5R Electronic Conversion
Description
Revo 2.5R Electronic Conversion These are the Battery Plate, ESC Box, and Radio Box that I designed to convert my old 2.5R revo to electric. I'm using 2S batteries but the plate will hold a 3S (or at least it does mine.) The ESC Box is pretty much sized for a FlySky 3 Channel receiver, and the ESC box is designed for the QuicRun 10BL120 from Hobbywing. However, I did include an ESC Top Blank so you can modify it to fit your needs without too much trouble. You'll need your own motor mount, I used this one: https://www.amazon.com/dp/B0047YQAH2 Good luck and happy bashing! I'm not a pro at this so these parts don't fit perfectly. The fit well enough to run on my truck though. I haven't had time to bash on it so I'm not 100% sure that they will hold up to anything, but you're more than welcome to remix if you can fix the issues. I printed everything at .28 so that it wouldn't take so damn long. There is nothing very intricate about any of the parts so I can't imagine you *need* anything better than that. I did print the battery plate at 100% infill because I wanted to be sure, and LiPo batteries are a little to 'splodesy for me to trust 10%. I used PLA, but use whatever you have laying around really. There is plenty of already in place support in the truck already, I'm just filling in the gaps really. Material: PLA Infill: 10% Except Battery Plate, 100% on it. Resolution: .28 Supports: Bed and Part (tree if you can)
Statistics
Likes
0
Downloads
0