3DFused Direct Drive Winnsinn Bracket and Shim
Description
This is the bracket and shim you will need for the 3Dfused direct drive kit if you have a WINNSINN dual geared kit. https://3dfused.com/product/linear-rail-direct-drive-mount-kit/ The NEMA shim is slightly oversized for various stepper motors. I don't know if this will work with other aftermarket drive feeds. You will need additional hardware for this bracket. The grub screw is to hold the tensioner spring in place as the head on the standard screw will prevent the install of the bracket. I don't think theirs enough clearance to thin out the wall on the bracket to make it fit. Hardware: 2x M3x40mm screws 1x grub screw (not sure the size/length)
Statistics
Likes
0
Downloads
0