DJI Mavic 3 Fly More Storage Boxes
Description
This thing is a pair of storage boxes for the DJI Mavic 3's Fly More Combo bag. The Charger Box is designed to fit the lower compartment in the Fly More bag, just behind the batteries, and holds the Charging Hub, the Power Supply (only tested against the UK version, but others look similar sized), and the USB-A to USB-C Cable. The Prop Box is designed to fit the upper compartment, along with the transmitter (Smart Controller not tested), and holds the 8 spare props, the 4 ND filters in their case, and the Tray that holds the extra transmitter cables, MicroSD cards, spare control sticks and any other small accessories. Although not the more efficient use of space, they are designed this way so the charger box has all the parts you probably don't want to lug about on a walk, and can easily be removed and left at home or in the car, reducing the weight. The Prop Box and tray holds all the parts you probably do wish to take with you. All 8 props are a tight fit in the prop box, and the have to be installed alternating which end the prop tips are, so they sit as flat as possible. Also, pay attention to which way up you put them in, due to extra thickness at the pivot points. The tray lid is printed in TPU, and designed to be a slight stretch fit, relying on the nature of TPU to maintain a good tight fit that will not accidentally come off. All other parts are PLA. I printed the all parts using the standard, supplied "Standard" Cura profile, and used Cura's generic PLA and TPU95 material profiles. These can of course be varied, to create the best compromise between weight and strength to suit you.
Statistics
Likes
5
Downloads
0