EVGA GTX 980 GPU Fan Adapter
Description
I had a 20 cent fan fail on a $400 GPU, so this fits a 92mm case fan onto an EVGA GTX 980 GPU heatsink. Will likely fit other ACS 2.0 or similar heatsinks. Print with a high-temperature tolerant material like nylon. Idle temp for a GTX 980 is about 32C, and load temperatures can climb past 80C. If the mount melts under load, you'll likely find that your FLOPS will decline sharply. Absolutely not low profile. The GPU this was made for sits in a cluster, so clearance was an afterthought. You'll likely need a print of these for each fan you aim to use on your GPU. Even if you elect to dremel open the fan cover, you'll still need to share the likely single GPU fan controller pinout. To plug in a case fan into a GPU fan controller, you may need to use one of these to connect a PWM fan: https://www.amazon.ca/gp/product/B07T95C68T
Statistics
Likes
0
Downloads
0