Ps5 DualSense Stand with Magnetic Charger
Description
# Updates --------------------------------------------------------------------------------------------------------------------------- __Update 2021-12-06__ I updated the cable test file. It's now smaller and can also test if your charging cable tip is small enough to fit the design (probably all the models fit though) --------------------------------------------------------------------------------------------------------------------------- # Description It seems like "Download All Files" doesn't work at the moment, so click on the "Thing Files" tab and download them 1 by 1 instead. This thing is a stand for your playstation 5 DualSense controller. It's built to fit a magnetic charging cable, I use this one: https://www.amazon.se/gp/product/B07ZKCQPWQ (CAFELE magnetic charger USB-C), but I made a few different sizes so it should work for any round magnetic charger. To support different models of magnetic chargers I made 4 different versions of the base for different cable width. If you have same model of. the charger as me you can print the base called s3. If you have another model you may first print the cable test to see which size fits better, here you should choose the largest size you can fit the cable in where it doesn't move if you give it a light tug. If you have a different model and don't want to print the cable test you can print the largest size (s4) and put some tape around your cable until it fits firmly. The 4 pieces have snap fits so there's no need for glue. How to do? 1. Find the right size for you using the cable test described above, or s3 if you have same charger model as I do. 2. Print everything. 3. Remove the support using a screwdriver to snap it free as described below and as shown in picture #2. 4. Attach the right base to the right panel. 5. Place your ps5 controller on the half-finished stand with the cable plugged in. Then push the cable into the base picture #3. Make sure to push the cable all the way in so it's not sticking out. Then make sure that it still has contact with the magnet on the DualSense controller, you may want to use the left panel as well. 6. If everything looks good attach the left base and left panel. The snap fits are very tight so once they're there you might not be able to remove them without breaking the snap fits. So make sure you don't put the cable too far back. The stand for the ps5 headphones seen in the last picture can be found here: https://www.thingiverse.com/thing:5078201 Enjoy! :) Let me know if it doesn't work for your charger and I'll make adjustments.
Statistics
Likes
2
Downloads
0