Treatlife DS02 Dimmer Flashing Jig
Description
This is a quick printing jig to aid in quickly flashing TreatLife DS02S Single pole dimmers without having to solder wires to the PCBs. It uses standard Dupont male jumper wires that have 1mm square pins and 2.5mm square plastic connectors. The connectors are simply pushed into the jig. The jig has a small notch that fits between the main PCB and the ESP sub PCB for alignment. It clips on firmly and can be easily removed. I have flashed 8 dimmers with minimal effort once the metal pins were aligned with the ESP sub board. Please read the Post-print text for more info on getting this jig to work.
Statistics
Likes
0
Downloads
0