4080 Mount for Pivoting Virpil VPC mount
Description
Designed to allow for a pivoting mount to be mounted to a 4080 extrusion. I specifically designed it for this: https://www.thingiverse.com/thing:5152425 Requires 2 M8 T-Slot nuts, 2 M8 bolts (may need washers depending on bolt length), and one 3/8-16x2-1/2" bolt with washers and a nut. The tolerances for the main through bolt are pretty tight so expect to either self-thread the bolt through or run a drill through. I personally allowed the bolt to thread itself in as it gives a tighter hold on the pivot. I also glued two washers to tighten the fit to my pivoting VPC mount.
Statistics
Likes
1
Downloads
0