Retroid Pocket 2 Right Stick Caps
Description
Retroid Pocket 2 Right Stick Cap ========================= I got sick of my RP2 right stick cap getting lost, so I made a 3D printable replacement. This file has all 3 stick variations in a single model. Printing all 3 is pretty cheap and that way you can decide which one you like best yourself. Improvements Over Stock Cap --------------------------------------- - These sticks have a much tighter fit than the stock one did. They snap on a lot harder and are almost difficult to remove. I can actually lift my RP2 up by the stick now and it doesn't fall off. I've never lost my stick cap since switching to these. - Slightly taller to improve clearance between the shell and bottom of the stick cap. This shouldn't really be noticeable, but it improves things quite a bit if you use those rubber stick caps for the Nintendo Switch as decorations on your sticks. (I use little pokéball ones. They're quite popular). Video demonstrating enhancements: [https://youtu.be/Qb2l9azas4Y](https://youtu.be/Qb2l9azas4Y) Stick Types ---------------- White - Concave. I tried to sort of mimic the existing stick cap, but wasn't really able to match it will with a 3D printer, so I opted for this instead. It has much better grip than the original and is the main replacement. Black - Disc. I use this one if you use Nintendo Switch stick covers. The stick sits just a little bit higher than the stock one, so the rubber from the covers can move beneath the stick without catching on the RP2 shell. Orange - Flat Dome - I don't really expect anyone to use it, but if you like it, go ahead.
Statistics
Likes
1
Downloads
0