Dyze Extruder direct drive part for CR10 Smart
Description
This is a V2 version of the part that allow to put a Dyze Extruder Pro in direct drive for the Creality CR10 Smart. just let 1-1.5mm between the capricorn tube from the Hotend and the Dyze extruder exit to allow the Hotend to move up when probing. This part was print on a Makerforged Onyx One et Onyx filament (Nylon Carbon) Please let me know if you want some :) ) You can print it in PLA / PLA+ / PLA Tough. I recommend the excellent Prima Select PLA Tough You need also a part that goes just after the filament sensor to screw the pneumatic Quick Connector. Don't forget to modify the Estep for the extruder motor : E Ratio Trans. = 636 for me The wire provided with the Dual extruder goes in replacement of the original motor connector : so easy !
Statistics
Likes
12
Downloads
0