Raspberry Pi02W case with camera and IR Led for MotionEye
Description
Hello, just a simple case to fit all together with a stand that need to be screw and wall or roof... Inside : - 1 x Rpi2W - 1 x cam 3MP + IR Led (you got 2 but only one is enough for indoor use : https://fr.aliexpress.com/item/1005003187564458.html?spm=a2g0o.productlist.0.0.12c52979N3ip4L&algo_pvid=f246bc4f-b8bd-4a14-9b70-85eb4b2489fe&algo_exp_id=f246bc4f-b8bd-4a14-9b70-85eb4b2489fe-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000024565684504%22%7D -1 x flex ribbon cable 8cm for Rpi0W or Rpi02W, same : https://fr.aliexpress.com/item/1005002969357117.html?spm=a2g0s.9042311.0.0.27426c37FHepxP - 1 x usb to Ethernet 100Mbps adapter : https://fr.aliexpress.com/item/32970749345.html?spm=a2g0s.9042311.0.0.27426c37TFX9CE - 1 x USB female port : https://fr.aliexpress.com/item/4000778021308.html?spm=a2g0s.9042311.0.0.27426c37lXAJsm -1 x USB Male adaptor to solder wire easely with the female one. Need support for printing the Pi stand. Need to open the Ethernet adaptor and just keep the board with the back Ethernet connector and pass strew the hole of the case and hot glue it! Same for female USB just hot glue it, look at pictures. My favorite software is MotionEye on top of RaspiOs install, latest, you got 10FPS stable with no dissipator, 6% CPU usage when idle and 60°C. Why Ethernet? much better performance and recording with no lag :) Enjoy.
Statistics
Likes
0
Downloads
0