Case Relayboard Raspberry
Description
JOIN THE PROJECT https://campercontrol.pekaway.de | Bauteile: a. Klappe RPI 3 b. Deckel c. Gehäuse || zusätzlich benötigt: 4x Rändelmutter M3x5 4x Schraube M3x8 Die Rändelmuttern (M3x5) werden, mit einem heißen Lötkolben, in die dafür vorgesehenen Löcher des Gehäuses gepresst. So kann die Klappe an das Gehäuse angeschraubt werden (M3x8) ||| Zur Befestigung für das RPI, benötigt man zusätzlich: 2x Mutter M2 2x Abstandshalter M2x17 2x Schraube M2x4 ---------------------------------------------------------------------------------- | components: a. lid RPI 3 b. top c. casing || additionally required: 4x knurled nut M3x5 4x screw M3x8 The knurled nuts (M3x5) are pressed into the provided holes in the housing with a hot soldering iron. Thereby the lid can be screwed to the housing (M3x8) ||| To attach the RPI, you also need: 2x nut M2 2x spacers M2x17 2x screw M2x4 (we have also the oportunity to give you fitting files for RPI 4) ---------------------------------------------------------------------------------- How is it used? This case is designed for our Camper Control System that helps you control all your technical devices in your camper van directly with your smartphone, tablet or laptop. All you need is our Raspberry Pi Relayboard and a Raspberry Pi - the software for that is open source and can be downloaded on our website.
Statistics
Likes
0
Downloads
0