Garmin Approach R10 Golf Launch Monitor Stand - Shot Alignment and Leveling Aid
Description
**NOTE:** All print files are hosted on PrusaPrinters at https://www.prusaprinters.org/prints/91017-garmin-approach-r10-golf-launch-monitor-stand-shot This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment stripe within the base. Print center will fit a 32x7mm Bullseye Spirit Level, held in with a bit of superglue. Alignment stick hole is modeled at 6.5mm to fit a ¼ inch wooden dowel. You may need to sand your dowel or add a bit of tape to get it to fit well depending on dowel tolerances. I painted my dowel red with spray paint. I also included the full STEP and F360 files in case you want to modify the print to fit your alignment stick or other needs better.
Statistics
Likes
2
Downloads
0