Cover Adapter for U-bracket 60kg Servo DS5160 SSG
Description
this is a new bottom cover for the big 60kg Servo DS5160 SSG to get a u-bracket as it is almost impossible to buy these servos with the right brackets, even though they are offered with them everywhere. when you receive the package you will notice ... no brackets :( This design should solve the problem so that you can equip your 60kg servos with u-brackets and use them for robotics projects or the like. The counter horn is equipped with a standard skateboard-bearing. an M8 screw serves as the pin. the flanges (right word?) are made from 2mm aluminum plate everything is screwed together with M3 and nut-inlays as the top cover is much more complex with all the gear and bearings, I decided to leave it like this and add a little adapter instead first tests showed that it is promising and rock solid I am looking forward to your feedback. I printed without any support. This was designed in Tinkercad and the original files as well as the servo itself can be found here: https://www.tinkercad.com/things/30IDbbOjADL
Statistics
Likes
2
Downloads
0