Turntable for Tabletop Miniatures
Description
This thing is a turntable for taking better photos and recording 360° videos of your painted miniatures. # Features: - can be driven smoothly by hand by attaching a simple string to the bottom of the turntable that you can pull slowly. - has a groove that should fit standard IKEA cups that I like to use as a raiser. # What you need: - 1 x 608zz bearing to connect the base and the turntable itself - 4 x Blu Tack (or similar product) to temporarily attach the turntable's base to your table # Notes: - The bottom part had a somewhat loose fit with the inside of the bearing. I suggest printing it at ~101% scale, which should result in an increase of the pin's diameter of roughly 0.7 mm and thus should result in a snug fit. I used Teflon tape to slightly increase the pin's diameter instead (as seen in the picture) to prevent a reprint.
Statistics
Likes
34
Downloads
0