FGC9 MKII Firing Pin Retention Insert
Description
I had some trouble with my firing pin sliding past the retention screw. I drew up this model in order to ensure my firing pin doesn't slide out past my bolt. Print settings using HATCHBOX PLA Nozzle size: 0.40mm Layer height: 0.1mm Infill density: 100% Nozzle temperature: 230°C +-5°C Bed temperature: 60°C Cooling: 100% Disclaimer: As you all know, producing the FGC9 carries with it inherent risk. I do not claim any responsibility for injuries that may result from using these models in a way that may cause injury. If you choose to use this product you are responsible for yourself. If you like this file please consider donating: https://www.paypal.com/paypalme/WyldTurkey THIS FILE HAS BEEN TESTED: https://odysee.com/@Turkey:d/FGC9_MKII_Firing_Pin_Retention_Insert:3 https://www.youtube.com/watch?v=lVrOWPanEjU
Statistics
Likes
0
Downloads
0