Tenlog TLD3 -Pro Purge Bucket
Description
At Standard resolution it takes about 2 1/2 hours to print. Set it up for mirror printing and you'll get a left and a right. If you're using Cura then scroll down to the "Experimental" tab and select "Make Overhangs Printable". It does a nice job of sloping the interior of the box so you wont need to remove supports. To my knowledge Simplify 3D doesn't have a feature like that so you will need to select supports. I designed its width and notch dimension with these brushes from Amazon, just cut off the handle and place the brush head in the notch, no glue required. https://www.amazon.com/gp/product/B07F9LPGX5/ref=ppx_yo_dt_b_asin_title_o00_s02?ie=UTF8&psc=1
Statistics
Likes
0
Downloads
0