Fish Scaler
Description
A fish scaler using three bottle caps. I used a version of this with bottle caps screwed to a piece of wood that worked great so thought I'd make something a little more ergonomic. No fishing in my area right now so full disclosure, I have not tried this yet. I'm going to try supper gluing the caps in place to see how that holds first. If needed I provided a pilot hole to screw each cap to the handle so you'll need to drill a corresponding hole in the cap. I printed this with 10% gyroid infill except for the area around the three pilot holes. I used a PrusaSlicer modifier to print solid cylinders to reinforce the pilot holes for screw mounting the caps.
Statistics
Likes
15
Downloads
0