Nordic Ware Bundt Pan Wall Mount
Description
I have a bunch of bundt pans that are in the way and thought they would look nice hanging on the wall. These mounts are designed to screw into the wall with a #6 screw (use a small drywall anchor if going directly into drywall). After mounting, the hole of the bundt pan can slide over the mount and hang on the lip. Each mount includes an integrated spike on the bottom. This will dig slightly into the drywall when installed and prevent the mount from rotating. The included mounts are made to match the pans I have and likely work with other pans. The diameter of the bundt pan holes these are made for is: [Classic](https://www.nordicware.com/products/bronze-cast-bundt-pan/): 26.25mm [Heritage](https://www.nordicware.com/products/heritage-bundt-pan-1/): 23mm Holiday Tree: 19mm; lip is more of a tab on this one to accommodate detail inside the hole. "Vintage" (Fiesta Party Pan): 24mm These were made over time as I acquired more pans. You could likely use the "Heritage" mount for pans with bigger holes. The oblong pan in the middle is the Jubilee loaf pan; since it has no hole in it [I built a much more complicated wall mount](https://www.thingiverse.com/thing:4885409).
Statistics
Likes
1
Downloads
0