Fishing Float - one step print
Description
This design is a fishing float. It can be printed in one part without support. I only use a brim to make sure the part doesn't detach from the bed during printing. 3 outer layer with a slight overextrusion (+2%) make for good waterproof parts. 0% infill is doable but i use 10% for mechanical resistance. I use the full scale model and a 75% scale version for smaller lines. 100% scale floats work with 5 to 9g 75% scale floats work with 1 to 2.5g (plain water, not salt water) Nail polish works well to put some color on it.
Statistics
Likes
3
Downloads
0