Flange nut RH22x7
Description
Needed a new one for a piano stool. Because of the square thread (RH22x7) i could not find one. So i made one. Printed it and now the stool height adjustmend works again. Layer Height: -0.15mm Infill Density: -100% Infill Pattern: -ZigZag Print temp: -200 Build plate temp: -60 Print Speed: -60 mm/s Supports: -no Overhang Angle: -.. Build plate Adhesion: -Skirt Printing time: 1x - 02h 20min Fillament: 1x - 6.34m /~ 19g Material cost: 1x - 0.19 euro
Statistics
Likes
1
Downloads
0