D1 Mini Case and motor cover for the "Hollow Clock 3" by Shiura
Description
This "remix" is an alternate case for the "Hollow Clock 3" by Shiura for use with a D1 Mini controller. Original model here https://www.thingiverse.com/thing:5142739 The files included here are just the case and the motor cover. This is intended as an addition to the original model for those wishing to us a D1 mini as the controller. Print and follow all the original instructions for assembling the clock portion of the build. The case was designed so that the original clock stand will sit neatly on top. The motor cover just slides onto the original stand. No need to fasten either part. Use the attached pics as a guild for how to use these parts with the original build. **Program Change** You will need to modify the line of the original program to set the pins for the D1 Mini. Change the line to: That says "int port[4] = {4,5,6,7};" to: **int port[4] = {15, 13, 12, 14};** Note: these models are designed to be printed without the need of supports. See pic for print orientation.
Statistics
Likes
9
Downloads
0