Skywatcher Newton PDS Motor-Focuser
Description
Video Part-1: https://www.youtube.com/watch?v=1Kp29zBCZRQ Video Part 2: https://www.youtube.com/watch?v=7_p9IGg17Xs English: Motor-focuser for Skywatcher PDS Newton telescope with 1:10 drive - 3parts: focuser, electronic- box, driver (available in FUSION360 format, .obj-Format and STL) - Arduino-NANO - Chinese stepper-motor with 1:64 gear - ULN2003 driver - ASCOM / INDI compatible (set maximum to 65000 steps, this will give the complete way of this drawtube from 0 to max) - retrectable solution with single screw mounted to Crayford drawtube. - push-button focosing in 2 speeds optional - optional temperature sensor 1:10 Crayford drawtube can be used fully manually or with electrical push-buttons with 2 speeds selectable via switch or use ASCOM or INDI driver in N.I.N.A., APT, or any other SW using ASCOM or INDI. MoonLite protocol used. Use original MoonLite WIN10 32/64 bit driver for ASCOM use. Original "standalone" MoonLite SW is not working! Copy the sketch from the PDF document to your Arduino IDE. Select Arduino NANO and COM Port. Flash the Arduino-NANO. You can also use the original code from the developer, but than do not use a speed switch on PIN D9 !!! Original version: https://github.com/fehlfarbe/arduino-motorfocus https://www.thingiverse.com/thing:2063325 German / Deutsch: Motorfokusser für Skywatcher PDS Newton Teleskop mit 1:10 Feintrieb - Arduino-NANO - China Schrittmotor mit 1:64 Getriebe - ULN2003 driver - ASCOM / INDI kompatibel (max. Steps auf 65000 setzen, damit erhält man den kompletten Weg von 0 bis zum maximalen Auszug). - wegschiebbare Halterung mit Einschraubenbefestigung am Crayford-Auszug - optionaler Antrieb über 2 Taster und wählbar in 2 Geschwindigkeiten - Temperatursensor Der 1:10 OAZ kann völlig manuell oder mithilfe des Motors in 2 Geschwindigkeitsstufen eingestellt werden. Die Nutzung unter ASCOM und INDI ist möglich. Getestet mit N.I.N.A. und APT sowie Astroberry und StellarMate. Es wird das MoonLite Protokoll genutzt. Für ASCOM muß der Original-Treiber von der MoonLite WebPage für WIN10 runtergeladen und konfiguriert werden. Die MoonLite Standalone SW funktioniert nicht! Den Sketch aus dem PDF Dokument kopieren nach Arduino DIE und diesen flashen. Mann kann auch den Original-Code flashen. Dann funktioniert aber der Geschwindigkeitsumschalter nicht! Originalversion: https://github.com/fehlfarbe/arduino-motorfocus https://www.thingiverse.com/thing:2063325
Statistics
Likes
2
Downloads
0