Modern Santa Claus Christmas Ornament (Without Support)
Description
** - The "Download All Files" appears to be broken momentarily. But you can still download the file under the "Thing Files" tab above - ** **No glue required!** The assembly of this ornament solely relies on the little Connector Pieces. Therefore I recommend printing the Test_Fit_Pieces.stl first to ensure that your printer can print these with the correct tolerances. Then you can also choose in which version you want to print all the pieces that have three different tightness variations. For me, Version 2 (Normal Fit) works perfectly. Be careful when inserting them. Here are some suggestions for the assembly: - Join the Nose and Mustache Piece first - Be aware that the Nose Piece has to be inserted at an 80° angle into the top of the hat - Print some spare parts of the Nose and Mustache if you think you will have trouble inserting them The beard piece has the supports already added to the model. I recommend printing this with cooling turned fully on for the best possible overhangs. The overall weight of the model with 15% Infill and 2 Perimeters is 47 g (14 g red parts and 33 g white parts).
Statistics
Likes
17
Downloads
0