AV-8B Harrier Nozzle Handle for TM Warthog Modular Axis Wheel
Description
AV-8B nozzle handle for my modular axis wheel designed for the Thrustmaster Warthog Throttle assembly. After printing you must tap the holes with an M3x0.5 tap. Attach to the handle of the axis wheel with 2 M3 screws. I ended up using a longer screw on top with a nut and on the lower portion I used a shorter screw that barely protruded. As long as you tap the holes and don't over torque you should be fine without any nuts at all.
Statistics
Likes
1
Downloads
0