Open 6x17 Panoramic Camera
Description
02.01.22 Uploaded version 4 of all bodies, 6x12, 6x17 and 6x24 in STEP. 6x12 cone is for Fujinon SWD 65mm f/5.6 6x17 cone is for Fujinon SWD 75mm f/5.6 6x24 cone is for Nikkor SW 90mm f/8.0 Made to use with M3 bolts and M3 threaded inserts. 28.12.21 Updated some details, tolerances etc on all models (6x12, 6x17 and 6x24) "6x17 body v3" includes body, lid and lens cone 26.12.21 Added 6x12 and 6x24 versions, not tested. v3 update. 22.12.21 all main body parts are included in the v3 STEP file I'm using a Fotoman optical viewfinder with 617-75 mask. I don't know how to make an accurate sports finder or a helical focus. I like Dora Goodman's helical focus design, but don't know how to make it. v3 is threaded insert only for now. M3 nuts are so finicky to get right due to tolerances and hangovers etc. More smaller quality of life adjustments and improvements. Made v3, not tested One version for threaded inserts One version with M3 nuts Small improvements here and there Updated to v2 Simplified camera body Fixed some tolerances Fixed light traps leaking light All files have been replaced to STEP files now. I was unaware that SAT and STEP was not the same. Will constantly update this (sometimes without notice) until I don't. Will probably stop once I get it working. Might revisit some time in the future if the community has remixed it into something better. Important update. The cone I designed does not fit the Fujinon SWD 75mm. The rear lens is too large. The Nikkort 75mm 4.5 would be a better choice. v0.2 - 15.12.21 Updated some tolerances Added 3 screw holes for tripod adapter screws Updated film tracking numbers to follow 6x4.5 numbers and made sure it's accurate (at least with ilford films) to: 2 - 6 - 10 - 14 Fully open source. Please remix this and improve it. Share it with anyone, do whatever you want. STEP files included. Will upload all STL files as well after I get it working for me. I have not tested this camera yet, don't have a lens I can use, but followed a flange distance chart for Fujinon SWD 75mm, so flange from front of cone to film back is ~85mm. No idea if tolerances are accurate Uses M3 nuts and bolts everywhere.
Statistics
Likes
13
Downloads
0